(800) 354-4297

Home > Products > Industrial Solenoid Valves > Series 2192 > Model 2192-6021 1/2, ElectroSteam Industrial Solenoid Valve To play, press and hold the enter key. To stop, release the enter key. Model 2192-6021 1/2, ElectroSteam Industrial Solenoid Valve 1/2 in. KEY SPECS Medium Steam Operating Temperature 365º F Voltage 120V 60HZ 110V 50HZ Pressure Range 5.0 to 150.0 PSI DOWNLOADS Model 2192, Replacement Parts Hays, Valves Glossary Terms and Conditions Standard Features 2-way Normally Closed Pilot-Operated Piston-Type Bronze Construction UL Listed Variety of Voltages Maximum Temperature 195ºF Pressure Range 5 - 150 psi water Pressure Range 5 - 100 psi air Horizontal Installation Special Features Proven design. Many years of field experience have made these valves the standard in the industry. Wide range of operating pressures & temperatures. 5 psi to 150 psi pressure and temperatures to 195°F affords broad application and tremendous flexibility. Highest quality. Long life bronze castings and waterproof coils insure performance consistency for a long life. Rugged reliability saves money. Because of low incidence of down time and maintenance. Maximum flow. Minimum pressure drop internal design of this pilot operated piston-type valve assures exceptional flow performance. Two way-normally closed. Fail safe positive valve closing in the event of power failure prevents flooding or overfilling. APPLICATIONS NOTES Automatic and Remote Control of Steam Commercial Laundry Equipment & Facilities Commercial Dishwashers Bottle washers Pot & Pan Washers Industrial Maintenance Repair and Operation Boiler Blow Down All Voltages available in all sizes.

Home > Products > Marine Applications - Military > Model 2352, Marine Inline Valve, 1 in. Model 2352, Marine Inline Valve, 1 in. 1 in. KEY SPECS Flow Rates 4.0 to 23.0 GPM Differential Operating Pressure 15-150 PSID DOWNLOADS Terms and Conditions Standard Features Sizes: 1” Differential Operating Pressure: 15-150 PSID Flow Rates: 4.0, 4.5, 5.0, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10.0, 11.0, 11.5, 12.0, 13.0, 14.0, 15.0, 16.0, 16.5, 17.0, 18.0, 19.0, 20.0, 21.0, 22.0, 23.0 GPM Flow Accuracy: +/- 10% Maximum Operating Temperature: 160° Valves are marked with flow direction arrows, size and flow rate. Hydrostatic Tested @ 450 psi Fresh/Salt Water Configurations Service Kits Available Tested to Military Standards Connections are available with Silver Braze (C83600 & C90300) or - Socket Weld End (C96200, C71500, S30400) or Solder (C36000) Fittings Approximate weight: 5.75 lbs SPECIFICATIONS Valve Style Inline Model No. 2352 Size 1 in. Flow Rate 4.0 to 23.0 GPM Inlet Connections Silver Braze Socket Weld End Outlet Connections Silver Braze Socket Weld End Differential Operating Pressure 15-150 PSID Maximum Operating Temperature 160° F Accuracy ± 10 % Hydrostatic Testing Limit 450 psi

Home > Products > Marine Applications - Military > Model 3603, Inline Low Differential Pressure Valve Model 3603, Inline Low Differential Pressure Valve 1 in. KEY SPECS Flow Rates 4.0-10.0 GPM 11.0-19.0 GPM 20.0-23.0 GPM Differential Operating Pressure 3-150 PSID 4-150 PSID 5-150 PSID DOWNLOADS Terms and Conditions Standard Features Sizes: 1” Differential Operating Pressure: 3-150 PSI (4.0-10.0 GPM); 4-150 PSID (11.0-19.0 GPM); 5-150 PSID (20.0-23.0 GPM) Flow Rates: 4.00, 4.50, 5.00, 6.00, 6.50, 7.00, 7.50, 8.00, 8.50, 9.00, 9.50, 10.0, 11.0,11.5, 12.0, 13.0, 14.0, 15.0, 16.0, 16.5, 17.0, 18.0, 19.0, 20.0, 21.0, 22.0, 23.0 GPM Flow Accuracy: +/- 5% over 95% of operating pressure differential range Maximum Operating Temperature: 160°F Valves are marked with flow direction arrows, size and flow rate. Hydrostatic Tested @ 450 psi Service Kits Available Tested to Military standards Low Operating PSID replacement for 2352, 1” valve SPECIFICATIONS Valve Style Inline Model No. 3603 Size 1 in. Flow Rate 4.0-10.0 GPM 11.0-19.0 GPM 20.0-23.0 GPM Inlet Connections Silver Braze Socket Weld End Outlet Connections Silver Braze Socket Weld End Differential Operating Pressure 3-150 PSID 4-150 PSID 5-150 PSID Maximum Operating Temperature 225° F Accuracy +/- 5% over 95% of operating pressure differential range Hydrostatic Testing Limit 450 PSI

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1041 1/2, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1041 1/2, Mesurflo® Automatic Flow Control 1/2 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 1/2 in. Flow Rate 1 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2-7/32 in. Diameter Across Corners 1-1/4 in.

Home > Products > Marine Applications - Military > Model 2351, Marine Inline Valve Model 2351, Marine Inline Valve 3/4 in. KEY SPECS Flow Rates 2.50 to 10.0 GPM Differential Operating Pressure 15-150 PSID DOWNLOADS Terms and Conditions Standard Features Sizes: ¾” Differential Operating Pressure: 15-150 PSID Flow Rates: 2.50, 3.00, 3.50, 4.00, 4.50, 5.00, 5.50, 6.00, 6.50, 7.00, 7.50, 8.00, 8.50, 9.00, 9.50, 10.0 GPM Flow Accuracy: +/- 10% Maximum Operating Temperature: 160° Valves are marked with flow direction arrows, size and flow rate. Hydrostatic Tested @ 450 psi Fresh/Salt Water Configurations Service Kits Available Tested to Military Standards Body available in C83600 & N04400 Connections are available with Silver Braze (C83600 & C90300) or - Socket Weld End (C96200, C71500, S30400) or Solder (C36000) Fittings Approximate weight: 2.13 lbs SPECIFICATIONS Valve Style Inline Model No. 2351 Size 3/4 in. Flow Rate 2.50 to 10.0 GPM Inlet Connections Silver Braze Socket Weld End Outlet Connections Silver Braze Socket Weld End Differential Operating Pressure 15-150 PSID Maximum Operating Temperature 160° F Accuracy ± 10 % Hydrostatic Testing Limit 450 PSI

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1081 1/2, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1081 1/2, Mesurflo® Automatic Flow Control 1/2 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 1/2 in. Flow Rate 2 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2-7/32 in. Diameter Across Corners 1-1/4 in.

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-0061 1/4, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-0061 1/4, Mesurflo® Automatic Flow Control 1/4 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 1/4 in. Flow Rate 6/10 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2 in. Diameter Across Corners 1-1/16 in.

Home > Products > Industrial Solenoid Valves > Series 2192 > Model 2192-6421 1/2, ElectroSteam Industrial Solenoid Valve To play, press and hold the enter key. To stop, release the enter key. Model 2192-6421 1/2, ElectroSteam Industrial Solenoid Valve 1/2 in. KEY SPECS Medium Steam Operating Temperature 365º F Voltage 24V AC 50/60HZ Pressure Range 5.0 to 150.0 PSI DOWNLOADS Model 2192, Replacement Parts Hays, Valves Glossary Terms and Conditions Standard Features 2-way Normally Closed Pilot-Operated Piston-Type Bronze Construction UL Listed Variety of Voltages Maximum Temperature 195ºF Pressure Range 5 - 150 psi water Pressure Range 5 - 100 psi air Horizontal Installation Special Features Proven design. Many years of field experience have made these valves the standard in the industry. Wide range of operating pressures & temperatures. 5 psi to 150 psi pressure and temperatures to 195°F affords broad application and tremendous flexibility. Highest quality. Long life bronze castings and waterproof coils insure performance consistency for a long life. Rugged reliability saves money. Because of low incidence of down time and maintenance. Maximum flow. Minimum pressure drop internal design of this pilot operated piston-type valve assures exceptional flow performance. Two way-normally closed. Fail safe positive valve closing in the event of power failure prevents flooding or overfilling. APPLICATIONS NOTES Automatic and Remote Control of Steam Commercial Laundry Equipment & Facilities Commercial Dishwashers Bottle washers Pot & Pan Washers Industrial Maintenance Repair and Operation Boiler Blow Down All Voltages available in all sizes.

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1031 1/4, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1031 1/4, Mesurflo® Automatic Flow Control 1/4 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 1/4 in. Flow Rate 3/4 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2 in. Diameter Across Corners 1-1/16 in.

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-0011 1/4, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-0011 1/4, Mesurflo® Automatic Flow Control 1/4 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 1/4 in. Flow Rate 2/10 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 2 in. Diameter Across Corners 1-1/16 in.

Home > Products > Industrial Solenoid Valves > Series 2192 > Model 2192-6121 1-1/4, ElectroSteam Industrial Solenoid Valve To play, press and hold the enter key. To stop, release the enter key. Model 2192-6121 1-1/4, ElectroSteam Industrial Solenoid Valve 1-1/4 in. KEY SPECS Medium Steam Operating Temperature 365º F Voltage 240V 60HZ 220V 50HZ Pressure Range 5.0 to 150.0 PSI DOWNLOADS Model 2192, Replacement Parts Hays, Valves Glossary Terms and Conditions Standard Features 2-way Normally Closed Pilot-Operated Piston-Type Bronze Construction UL Listed Variety of Voltages Maximum Temperature 195ºF Pressure Range 5 - 150 psi water Pressure Range 5 - 100 psi air Horizontal Installation Special Features Proven design. Many years of field experience have made these valves the standard in the industry. Wide range of operating pressures & temperatures. 5 psi to 150 psi pressure and temperatures to 195°F affords broad application and tremendous flexibility. Highest quality. Long life bronze castings and waterproof coils insure performance consistency for a long life. Rugged reliability saves money. Because of low incidence of down time and maintenance. Maximum flow. Minimum pressure drop internal design of this pilot operated piston-type valve assures exceptional flow performance. Two way-normally closed. Fail safe positive valve closing in the event of power failure prevents flooding or overfilling. APPLICATIONS NOTES Automatic and Remote Control of Steam Commercial Laundry Equipment & Facilities Commercial Dishwashers Bottle washers Pot & Pan Washers Industrial Maintenance Repair and Operation Boiler Blow Down All Voltages available in all sizes.

Home > Products > Industrial Solenoid Valves > Series 2305 > Model 2305-1041 3/8, Mesurflo® Automatic Flow Control To play, press and hold the enter key. To stop, release the enter key. Model 2305-1041 3/8, Mesurflo® Automatic Flow Control 3/8 in. KEY SPECS Type Flow Control Temperature Range 32 to 160 ºF Pressure Range 15.0 to 150.0 PSID DOWNLOADS Series 2300, Technical Data Hays, Valves Glossary Terms & Conditions Standard Features Constant flow regardless of pressure fluctuation Quiet operation Pressure Differential Range 15 - 150 psid Temperature Range 32º to 160º F Accuracy ± 10% Suitable for Most Coolants Consult factory for differential pressures lower than 15 psid Unique Hays design Patented Flow Control Assembly provides a constant flow rate on a consistent basis. Flexing diaphragm is self-cleaning Maintains clear orifice by flexing action of patented diaphragm assembly which significantly reduces clogging. Long-life means real savings Mesurflo Controls will operate efficiently for many years which means little or no down time and loss of productivity. Diaphragm area is proportioned to pressure Each Mesurflo is designed specifically to deliver the prescribed flow rate. Mesurflo can be used for large flow rates. Mesurflo controls are placed parallel in a single housing providing the specified flow rate even on large flow rates. SPECIFICATIONS APPLICATIONS Irrigation and Crop Dusting Swimming Pool Filters Industrial Equipment Cooling Systems Electronic Power Tube Cooling Systems Welding Equipment Cooling Systems Pump, Compressor, & Vacuum Equipment Cooling Systems Industrial Time Fill & Meter Equipment Tankless Heater & Heat Transfer Systems Water Stream & Water Spray Control Film Process & Rinse Systems Industrial & Medical Stills Water Conservation Applications Water Table Drawdown Water Source Heat Pumps Pump & Dump Systems Size 3/8 in. Flow Rate 1 GPM Differential Pressure Range 15.0 to 150.0 PSID Temperature Range 32 to 160 ºF Accuracy ± 10 % Overall Length 1-3/4 in. Diameter Across Corners 1-1/16 in.